Mustang Cobra Street Performance Belt Tensioner 2003-2004
DescriptionStreet Performance Belt Tensioner for Mustang Cobra 2003-2004 If you are running a supercharged Cobra then you know that your... read more
- Additional information
- Reviews (0)
- Add a review
Street Performance Belt Tensioner for Mustang Cobra 2003-2004
If you are running a supercharged Cobra then you know that your factory belt tensioner was not designed to stand up to the stress and strain of the added HP and Torque, especially if you are racing. Our Street Performance Tensioner is fabricated from 6061-T6 Billet Aluminum, not cast. Internal components include a TGP shaft, hardened bushings, proprietary spring and thrust bearings make this the strongest and smoothest belt tensioner on the market. It has been tested and proven on the DYNO and the Track and will reduce if not completely eliminate belt slip, which will increase boost and HP. Best of all it is a direct bolt on replacement for the stock unit, no brackets, fittings our adapters are needed. Recommended for cars making up to 1000 HP. We are so confident that our tensioner will not bend or break that we will guarantee it for the life.
Mustang Cobra 2003 – 2004
Spring Tension 40 LBS
When ordering purchase 76MM Grooved Bearing Pulley
Shipping Weight 3lbs.
Box Size 9x5x4
Upgrade your pulley to Ceramic Bearings!
Serious racers are constantly pushing the envelope and everyone knows that shaving off .001’s of a second from their ET which translates into more win lights.
Ceramic hybrid bearings use ceramic balls and steel races. Ceramic balls weigh up to 40% less than steel balls, depending on size. This reduces centrifugal loading and skidding, so hybrid ceramic bearings can operate up to 50% faster than conventional bearings. This means that the outer race groove exerts less force inward against the ball as the bearing spins. This reduction in force reduces the friction and rolling resistance. The lighter ball allows the bearing to spin faster, and uses less energy to maintain its speed.
Ceramic silicon nitride balls exhibit much greater hardness than steel balls resulting in at least 10 times greater ball life due to the ability to hold the surface finish longer. The ball has dramatically smoother surface properties than the best steel ball resulting in less friction between the balls and bearing race surfaces. Thermal properties are also dramatically improved over steel balls resulting in less heat buildup at high speeds. Ceramic has 35 percent less thermal expansion, 50 percent less thermal conductivity, are lighter weight and are non-corrosive
- 3 lbs
- 9 × 5 × 4 in
- PULLEY OPTIONS
76 MM GROOVED BILLET IDLER PULLEY, WITH OUT PULLEY
- PULLEY OPTION
ADD CERAMIC BEARINGS, NO CERAMIC BEARINGS
- There are no reviews yet.
COPO/2.6L Magnuson Racing Belt Tensioner
tensioner $750.00 – $900.00 Choose Options
Mustang GT500 Black Anodized Racing Belt Tensioner
tensioner $440.00 – $530.00 Choose Options
Edelbrock 2650 and GT 5.0 Billet Tensioner with Pulley
tensioner $675.00 – $825.00 Choose Options
HEMI Racing Belt Tensioner
tensioner $625.00 – $700.00 Choose Options